Fox 50 VX L=4800 mm, L=5260 mm, L=5600 mm
Electro-hydraulic scissor lift with capacity 5.000 kg (11000 lbs)
The lift is already according the updating of August 2010 of the european norm EN 1493
Versions:
N - standard runway (not equipped)-
CA - front recess for turn plates and/or play detectors
CT - total convergence front recess + rear slip plates
LT - version with lift-table for wheel free working
I - flush Mount version
N - standard runway (not equipped)-
CA - front recess for turn plates and/or play detectors
CT - total convergence front recess + rear slip plates
LT - version with lift-table for wheel free working
I - flush Mount version
Description
-The CT/LT version offers the maiximum versatility for the alignment service and any other use
-The access ramps/wheel stops hinged on the platforms eliminate obstacles on the floor when the lift is raised up.
-The levelling system is provided by master cylinders integrated into the hydraulic unit.
-The regulating bolts on the base (12) are double to allow regulation between the floor and the base, and between the base and the Platform (with lift closed).
-The front recess is 50 mm/1,9 inch deep
-The rear slip plate is 2270 mm/89,4 inch long and is built in the Platform. This is steel made and moves upon plastic rolls. Furthermore, thanks to its generous dimensioning it has +-3° angle of rotation.
-LT (Lift Table) 3.500 kg (7710 lbs)
The lift is already according the updating of August 2010 of the european Norm EN 1493
Safety Devices:
-Parahute valves on the lift and LT
-Automatically-activated mechanical safety locks
-Photocells for Platform synchronization control
-Limit switch with acoustic warning for the complete lowering
-Low voltage control circuit (24V)
-"Dead -man " Controls
-The access ramps/wheel stops hinged on the platforms eliminate obstacles on the floor when the lift is raised up.
-The levelling system is provided by master cylinders integrated into the hydraulic unit.
-The regulating bolts on the base (12) are double to allow regulation between the floor and the base, and between the base and the Platform (with lift closed).
-The front recess is 50 mm/1,9 inch deep
-The rear slip plate is 2270 mm/89,4 inch long and is built in the Platform. This is steel made and moves upon plastic rolls. Furthermore, thanks to its generous dimensioning it has +-3° angle of rotation.
-LT (Lift Table) 3.500 kg (7710 lbs)
The lift is already according the updating of August 2010 of the european Norm EN 1493
Safety Devices:
-Parahute valves on the lift and LT
-Automatically-activated mechanical safety locks
-Photocells for Platform synchronization control
-Limit switch with acoustic warning for the complete lowering
-Low voltage control circuit (24V)
-"Dead -man " Controls
